المقالات الأخيرة

  • Production Cost Of Stool Mould

    The plastic Stool Mould design requires a rounded edge at the end of the side wall. Therefore, the parting line must be moved to the position where the radius intersects the outer wall formed by the cavity. There is usually no particular reason to oppose this design, except that it is more expe...
  • The Choice Of Cabinet Mould

    In addition to chair moulds, Cabinet Moulds are also one of our main products. There are many types of cabinets. The advantages and disadvantages of each type are analyzed below. Solid wood cabinets We usually use solid wood cabinets most often. This cabinet is well recognized by consumers. Its ad...
  • Trash Can Mould Is A Green Way Of Life

    The trash can is produced by the Dustbin mold , and plastic trash cans have very high practical value in our lives. The plastic trash can, which is called a treasure of environmental protection, does have its advantages. Whether it is from its true use value or practical value, or its quality and p...
  • Cleaning Advantages Of Trash Can Mould

    The trash can brings a sanitary and clean experience to our lives. It is produced by the Dustbin Mould. Here are the advantages of cleaning plastic trash cans: (1) Plastic trash cans are relatively simple to process and are made of energy-saving materials. In use, not only does it reduce a lot of c...
  • Introduction Of Armchair Mould

    The armchair is produced and processed from the Armchair Mould. Two kinds of modern armchairs and travel armchairs are discussed here. Modern armchairs are an outstanding example of the application of ergonomic design in the seating part. It is conceived to fit the human spine and automatically chan...
  • Production Characteristics Of Flowerpot Mould

    Flower Pot Mold  is our product, do you know its molding process? The injection molding process involves mixing plastic raw materials pe or pe, using an injection molding machine to heat and melt them and inject them into the plastic flowerpot mold under high pressure, cool and shape, and take ...
  • What Are The Requirements For Flowerpot Molds?

      We are a professional mould manufacturer, among which Flower Pot Mould is one of our products. The relevant parameters of the specific products of the flowerpot mold are as follows:Product specifications: depends on your sample/drawing designMold cavity: single cavity or multiple cavityDie s...
  • We Can Provide Armchair Mould Equipment

      We are a professional mold manufacturer, among which Armchair Mold is one of our products. Chairs are one of the main furniture essential in our daily lives. There are many different styles of modern chairs, from appearance to raw materials to injection molding technology. Our molds provide ...
  • Design And Manufacturing Of Trash Can Mould

    We are a professional mold manufacturer, and Dustbin Mould is one of our products.Manufacturing and Design of Trash Can MouldThe design requirements of molded plastic trash cans sometimes do not allow the trash can to be directly taken out of the plastic trash can mold when opened. This is the case ...
  • Armchair Mould And Our Products

      We are a professional mold manufacturer, among which Armchair Mold is one of our products. We produce various plastic molds, including the following items, but not limited to the following items: Industrial trash can mold, industrial trash can mold, industrial trash can mold, plastic pallet ...
  • How To Easily Remove Scale From Pitcher Mould

      We are one of the professional mold manufacturers, and the Pitcher Mould is one of our products. Jug molds are usually called kettle molds. After buying the water tank mold, long-term use will definitely cause scale problems. How to solve this problem? Here are several ways to remove scale a...
  • Users May Be Concerned About The Four Major Problems Of Pitcher

      We are a professional mold manufacturer. You may have used Pitcher Mold s. That may be the shadow of our products, because water tank molds are also one of our products. The water tank molds we produce have the following 4 characteristics: 1. Anti-slip reinforced handles: we can see that the...
  • Related Parameters Of Drawer Mold

      We are one of the professional mold manufacturers. Among them, the Drawer Mould is one of our products. Here we mainly introduce the relevant parameters of the drawer mould.We believe that the advantages of plastic drawer molds are divided into 4 aspects:1. Compared with traditional wooden f...
  • Basket Mold Standard

      We produce Basket Moulds, according to the standard basketball diameter (dB) is 24.6 cm, and the ring diameter (dR) is 45 cm. FIBA stipulates that the unified standard for the height of the basket is 3.05M. We produce our products in strict accordance with the above requirements.Our product ...