With the development of modern sensor technology, the electronic scale industry has also developed rapidly, and there are more and more types of electronic scales on the market.
Book binding machine product type: refers to the binding method used by the binding machine, which can be divided into two types: punch binding machine and hot-melt binding.
Tubular Motor Manufacturers introduces the maintenance method of the motor:
1. The operating environment should always be kept dry, the surface of the motor should be kept clean, and the air inlet should not be obstructed by dust or fibers.
2. When the... المزيدTubular Motor Manufacturers introduces the maintenance method of the motor:
1. The operating environment should always be kept dry, the surface of the motor should be kept clean, and the air inlet should not be obstructed by dust or fibers.
2. When the thermal protection of the motor continues to operate, it should be ascertained whether the fault comes from the motor or the overload or the setting value of the protection device is too low. After the fault is eliminated, the operation can be performed.
3. The motor should be well lubricated during operation. The general motor runs for about 5000 hours, that is, the grease should be added or replaced. When the bearing is overheated or the lubrication is deteriorated during operation, the hydraulic pressure should be replaced in time. When replacing the grease, remove the old lubricating oil, and clean the oil grooves of the bearing and bearing cap with gasoline, and then fill 1/2 of the cavity between the inner and outer rings of the bearing with ZL-3... أقل