المقالات الأخيرة

  • Skills Of Reaming Bit Operation

    Before using the Reaming Bit, check the flexibility of the rotation of the air motor, remove obstacles in the working range of the drilling rig and on the road, and check the passing capacity of the road.Pay attention to the following safety operation items when drilling:   When opening the drill, s...
  • The Composition Of Dth Hammer

     DTH Hammer The hydraulic walking pile frame of this machine is mainly composed of top pulley block, column, diagonal strut, chassis, running mechanism, slewing mechanism, hoisting mechanism, control room, hydraulic system and electrical system.     The column is a folding type, with a box-sh...
  • How To Use Top Hammer Drilling Tools

    Drilling fluid requirements: Top Hammer Drilling Tools can work effectively for various muds, including oil-based mud, emulsified mud and clay mud, and even clean water. The mud viscosity and specific gravity have little effect on the drilling tool, but it has a direct impact on the pressure of th...
  • Introduction To Drill Pipe Operation

       What should I do if there is a special situation during Drill pipe operation?  1. During the drilling process of the hydraulic drilling rig, when the drill rods are connected by thread, the power head is strictly prohibited to reverse. Only when the drill rod is added or removed, the clamp can be...
  • How To Use Top Hammer Drilling Tools Correctly

    Top Hammer Drilling Tools are subject to great strain stress during rock drilling, and it requires careful operation and use to get the most benefit. Button bit products should reduce the propulsion and impact energy during use, and use a lot of flushing water. Otherwise, the waterless opening will ...
  • Introduction To The Composition Of Top Hammer Drilling Tools

          Top Hammer Drilling Tools is mainly composed of four major assemblies: bypass valve, hydraulic motor, cardan shaft and drive shaft. Screw motor is the main part of drilling tool. Many practical and theoretical analysis results show that if you want to make the mot...
  • Standard Use Of Reaming Bit

     With the prosperous development of modern society and economy, the application of support for Reaming Bit has become more and more extensive. However, many people did not follow the standard operation during the use process, which led to some problems. Let's come here. Know the precautions!&nb...
  • What Are The Advantages Of Dth Bit

    The die-satin hammer is replaced by a free forging hammer, which solves the difficulty of incomplete equipment.2. The anvil used is conducive to forming, and the DTH Bit will not be processed after forging, so the goal of no cutting is achieved.3. Use ∅200 bar material to form directly witho...
  • Replacement Of Dth Bit During Work

      Compared with percussion drilling, percussion drilling continuously drops heavy objects in the wellbore to chop up the rock. Rotary drilling uses a rotary drill bit to grind, cut, scrape and crush the rock at the bottom of the well. Rotary drilling is the most popular oil and gas drilling. Op...
  • How To Use Reaming Bit

    After Reaming Bit mentioned the surface, unload the drill bit and carefully take out the core from the core tube, wash away the mud on the surface of the core, measure the length of the core, and put the core in the core box in order, and mark the extraction The core drilling depth and core take rat...
  • How To Choose Dth Bit

    DTH Hammer's drill rod body is made of high-pressure seamless alloy steel pipes, and the spiral blades are made of high wear-resistant T-shaped steel belts, which are welded by prestressed winding. The drill pipe joints are made of high-quality medium-carbon alloy, which has just been treated with...
  • Preservation Of Water Well Drilling Tools

    Check the appearance quality of Rock Button Bits. Such as whether there are defects on the surface of the drill rod that affect the use, whether the flatness of the drill rod is good, etc. Some of these factors are caused during the handling process. Users of slightly bent drill rods can solve it ...
  • Introduction To Reaming Bit Cleaning

    Extension Drilling Tools factory through proper use and handling, drill rod will last longer, provide better results, and reduce operating costs. Drill rods account for 3% of the total cost of drilling. If the rod fails prematurely or accidentally, these costs may increase significantly. It takes a ...
  • Buy Water Well Drilling Tools With Confidence

          After many comparisons, many users finally choose to rotate Rock Button Bits on the pillars, not only because of its complete pillar models, but also because of its strength and professionalism.      (1) Reliable quality    ...
  • What Should Be Paid Attention To In Dth Hammer Construction

    During the pilot hole drilling process of DTH Bit, sometimes the drill rod may be stuck due to the collapse of the hole, insufficient water pressure, power failure, etc. after the accumulation of ballast in the hole, or the drill rod after the drill rod is broken during the pilot hole and reaming co...
  • Introduction To The Importance Of Top Hammer Drilling Tools

           For DTH Drill Pipe, the importance of the drill bit is self-evident. The quality of a drill bit directly affects the efficiency and hole quality of DTH Drill Pipe, so we need to pay attention to the selection and use of the drill bit. During the drilling process,...
  • Detailed Maintenance Knowledge Of Water Well Drilling Tools

    Let's learn about the general maintenance knowledge of Water Well Drilling Tools.1. Unit installation:1. Prepare a rock drilling space. The size of the space can be determined according to the type and method of drilling.2. Lead gas and water (when water and dust removal is needed) to the pipes, lig...
  • Future Prospects Of Drilling Tools Manufacturer

    My country's mining machinery industry has always been a pillar industry of the national economy and has an important impact on the country's development. With the support and guidance of national policies, the mining machinery industry will move toward an international high-end market stage through...
  • Dth Hammer Is An Essential Equipment

    DTH Hammer is a consumable tool accessory for coal mines. The high-efficiency twist-shaped drill pipe used for coal seam drilling rigs is made of high-quality carbon steel and is suitable for coal electric drills. This is a coal mine. An essential tool for mining. DTH Hammer is mainly divided i...
  • The Specialty Of Kaiqiu Dth Hammer Comes From Strength

      The kaiqiu brand DTH Hammer adopts low-concentration carburizing + high-temperature tempering + one-time quenching + low-temperature tempering process, which can better solve the problems of block collapse during the use of the down-the-hole impactor. When choosing the kaiqiu brand DTH ...
  • Introduction Of Equipment Operation By Drilling Tools Manufactu

    The roller cone bit is under the influence of the bit weight and the twisting of the drill string. After the teeth are crushed, the rock is eaten into the rock, and at the same time, the inevitable slip occurs and the rock is sheared. According to kaiqiu Drilling Tools Manufacturer, the operation st...
  • How To Solve The Problems Encountered By The Drilling Tools Man

    Troubleshooting of Drilling Tools Manufacturer's reverse drilling rig during drilling: 1. In case of an accident of burying or dropping a drill, the driver shall notify the relevant leaders in time, formulate accident handling measures, and deal with them. 2. When drilling a pilot hole, there i...
  • Production Of Drilling Tools Manufacturer Products

    Now the society is more and more complicated, and there are many kinds of products in life, so we need to pay attention to many problems in the production process of products, and the safety issues in the production process of kaiqiu Drilling Tools Manufacturer. What are they?First, the drilling too...
  • Introduction Of Advantages Of Water Well Drilling Tools

    The advantages of Water Well Drilling Tools construction have several advantages: safe, fast, and well quality. (1) Construction safety. Compared with other patio construction methods, during the construction of water well drilling tools, the workers do not need to enter the work surface for d...
  • What Are The Uses Of Dth Hammer

         What are the uses of DTH Hammer? Let us take a look today, hoping to help everyone. The down-the-hole impactor adopts a motor as a driving force for rotation through a high-performance reducer; and a cylinder as a driving force for driving. The hydraulic transmission syst...
  • Dealing With Dth Hammer Problems

    In addition to encountering complex formations that can cause the DTH Hammerto jam during normal drilling, there are the following reasons:     ①. Broken wing head;     ②. The new replacement head is larger than the original diameter;    ...