Rapid Splitter Rust Solution

  • Rust on the Rapid Splitter will cause the blade to become dull and reduce work efficiency. If it is not maintained, this situation will become more and more serious. Now how to prevent the wood chip machine from rusting has attracted the attention of many users. Next, let us solve this problem together.
       The working environment and placement environment of the wood chip machine have become the focus of attention, and then we can look for the problem that everyone cares about rust. After all, the condition of rust affects the quality of the wood chip machine equipment. The cause of the rust formation of the wood chip machine may be due to production, production costs and waste generation, resulting in huge damage to maintenance costs, early exchange equipment, and even personal hazards. The grinding value is also very high. Therefore, how to prevent the wood chip machine from removing rust and what about the future rust removal and rust prevention is a very urgent problem.
      The anti-rust of wood chip machine means that when the wood chip machine is pulled out of the storage, the paint is checked and repaired as required. Equipped with a mill, the preservative should meet the requirements of all contacts in the list. If the flywheel is to be removed from the eccentric shaft, the contact between the shafts should be guaranteed to be coated with preservative. During factory storage time or seasonal downtime, the grinder and disassembled components should be stored on a solid support to prevent contact with land. The wood chip machine must operate the wood chip machine for at least five minutes every month to ensure the stability of the bearing. If the circuit breaker cannot be operated, then during the storage process, manually rotate the wood chip machine flywheel 3 to 4 times to ensure the accuracy and smoothness of the bearing. If necessary, add smooth bearing grease to use.
      We know that rust not only affects the normal use of Log Splitter, but even repairs will also incur maintenance costs. Therefore, we can improve the occurrence of this situation by applying preservatives and perform timely maintenance during use. Do some maintenance after use, clean the blade and the body, the oil that needs to be added, the protection of the protection. It can be used normally when it is used again.