How To Replace The Stainless Steel Lock

  • For how to replace the stainless steel lock, you need to know some general information. From there you need to know what type of lock you are dealing with. Not only is it a mechanical lock or an electronic lock, but also what type of equipment the code lock is installed on, and how this will affect the operations required to replace the code lock.

    For example, changing a safe, number, or other password is different from what you can do with a padlock or door lock. Change is important. In fact, most of this information may not be specific enough to your situation, which is very important. However, this is the best combination of general and specific information that can be mixed together.

    General advice when replacing the combination lock
    Take it easy.
    Open the lock before trying to change the password.
    You may need a specific type of "reset tool" to replace the combination lock.
    If you make a mistake anywhere in the process, please wait a moment and try again from the beginning.
    Do not re-lock the device until you are sure to set the new combination.
    After changing the safe password, use the new password to unlock the safe 3 times, and then close the safe door.
    Some safes require safe locksmiths or other safe technicians to replace the locks and cannot be replaced by simple DIY methods.
    Look up the name of your lock to find specific information on how to change the lock combination.
    What equipment is the password lock installed on?
    Combination locks are used in a variety of different devices. Where you use the lock will actually tell you a lot about it. For example, it can help you narrow down the correct way to change the combination. Here are some important things about how to change the password lock on the following devices.

    1. Change the security combination
      When dealing with security combinations, you may encounter the most difficult method of how to change the combination lock. The determining factor of difficulty will depend on whether the security combination is digital.

    Mechanical dial locks have more diversified password change protocols and are usually more complicated than electronic safe passwords. Unless the safe is already opened, losing the safe password means that you need help to open the safe. This is one of many situations where you need a locksmith to open a safe.

    Check the "change password" or "how to change the password lock" section in the user manual. If you don't have a user manual, you can find one online. For some good general/specific insights, please keep reading.

    1. Change the safe combination: manual dial-if you get a safe from one of the best safe companies, you will most likely have a Sargent and Greenleaf mechanical manual dial. The process of how to change the security combination can be a bit tricky, but as long as you can find the change key, you can do it yourself.

    Open your safe.
    Open the safe door and use the existing combination to operate the dial. However, you will move the number to the change mark (the mark to the left of the 12 o'clock mark used to open the safe).
    Leave the safety dial on the last number in the combination.
    Insert the change key into the key hole on the inside of the safe door.
    Turn the safety key and do not over tighten the key in the keyway.
    Use the change flag to dial your new password, using the correct rotation process used when you opened the safe.
    Leave the safety dial on the last number of the new combination.
    Turn and remove the change key.
    Test the new combination multiple times while the door is still open.
    You can read more about this type of lock here. If you have an old or antique safe, it may require a different agreement to change the safe combination. The combination change process may be some variations of the above process. However, before attempting this process, make sure you know what you are doing or consult a professional.

    1. Change the security combination: Numbers – For number locks, they will have a reset button or dial program, and the number keyboard can be moved to programming mode. Without changing the digital code lock of the safe to the programming mode, the lock will only register the code when trying to open the safe.

    If you don’t know the specific protocol used by the digital safe code lock to enter the programming mode, please call the locksmith or find the user guide. Once you have a safe in programming mode, most digital locks will need to use an existing code to change the combination of the safe.

    You are most likely to have an S&G (Sargent and Greenleaf) lock, because most safe makers use this brand. The S&G digital safe password change agreement is as follows:

    When the door is open, press "7", then press "4", then press "*" (star button).
    The lock will enter the programming mode, but you still need to insert the current safe password, and then press "#" (the pound button).
    Wait until you hear five different beeps.
    By pressing "1" and then "*" (star button) to indicate that you want to change the security combination.
    Insert the new code and press "#" (pound button).
    Wait until you hear three different beeps.
    Insert the new code again and press "#" (pound button).
    Wait until you hear three different beeps, which will indicate that the first and second codes match.
    The digital lock will now exit programming mode.
    Before closing the safe, check that the new combination works as expected.
    You can view more available literature on Sargent and Greenleaf electronic locks here. For other less complicated electronic safe locks, to change the safe password, you can open the safe, press "0" six times, enter the current password, and then enter the new password twice.

    When none of these processes work, call the locksmith.

    1. Change the padlock combination
      Combination cable bicycle lock

    Not every password padlock can change its password. As far as modern password padlocks are concerned, many companies incorporate this feature into the design of new products, but for older password padlocks, you can only use the password that comes with it.

    Again, this will be different. To find out if your lock is an exception to this rule, look up the brand and model. If you don't have a model, you can find it online by searching for pictures or product listings of a combination padlock with the same brand name.

    When you can change the password on the padlock, this can be a fairly simple process. Because these locks are designed for the mass market, the designer hopes that the combination is easy to change (because this is what most consumers want). This does harm the security of the padlock, which is why you don’t see a combination lock in the list of the best padlocks ever.

    To find out if you can change the password on the padlock, let alone what the program is, keyed alike padlock manufacturers recommend using the following process.

    Open your preferred search engine.
    Enter information about the padlock.
    The name of the manufacturer.
    Combination style.
    Any other information you have about the lock.
    Look for videos or official documents.
    Make sure you can visually confirm that the lock you are talking about is the same as your own model.
    Try this method.
    When trying to change the password, try not to break the lock. It may be cheap to replace it, but you don't want to make anything you protect more fragile than it is already.