Comparison of Ftp Cat6 Cables Manufacturers

  •  

    Comparison of CAT6 and CAT6A cabling
    Six categories
    Compared with CAT5E cabling infrastructure, FTP CAT6 Cables Manufacturers' CAT6 cabling has many advantages and advantages. When CAT6 was first introduced, it was about 50% more expensive than CAT5E, which made it too expensive for many installations. However, over the years, the cost of CAT6 has been greatly reduced, and the cost is almost flat. CAT6 provides greater bandwidth than CAT5E and allows higher data transmission rates. Therefore, CAT6 has now become the minimum standard for new wiring installation. In addition to easily supporting 1 Gbps network speed, CAT6 can also support a higher data rate of 10Gbps. However, only 10Gbps is supported within a short distance of 37-55 meters.

    CAT6A

    CAT6A can support data transfer rates up to 10Gbps, with a maximum bandwidth of 500MHz. CAT6A has additional and tighter twists, and has additional insulation to reduce crosstalk. CAT6A is also backward compatible with CAT6 and CAT5E, however, the speed is always limited, and will apply to the lowest category cable or connector installed in the link. CAT6A is quickly becoming the most cost-effective solution because it is seen as a cable system for the future. CAT6A components are used in the EA type network defined in ISO/IEC 11801 and TIA/EIA 568.

    One of the obvious disadvantages of CAT6A is the actual size and weight of the cable. CAT6A was 50% larger when it first appeared in 2008. Since then, the cable size has shrunk and shrunk by 10%. The additional weight increase also reduces the number of cables that can be loaded into the cable tray and where they can be placed. This results in larger cable trays and conduits and smaller bundle sizes. Cable bending radii in cable trays, patch panels, and back wall sockets also require additional space.

    Termination methods and time are also considered to be detrimental to CAT6A installation, but the new modular jacks and sockets that can be terminated in about 2-3 minutes reduce installation time and cost.

    One of the main arguments supporting the installation of CAT6A infrastructure now is to make the network face the future. Therefore, if the planned life of the new cabling system is five years or more, CAT6A should be considered as an option. If the planned life cycle of the network is ten years or longer, CAT6A is clearly the most popular solution.

    In fact, when considering using FFTP CAT6A Cables Manufacturers' CAT6A components in a 10Gbps, Class EA network, please consider the following factors:

    CAT6A is recommended for new installations in the healthcare sector
    CAT6A is recommended for new installations in education
    CAT6A provides enhanced performance for Power over Ethernet (PoE)
    CAT6A supports wireless systems that rely on 10Gig